Waterproofing Membranes Specialties

Encore Building Products offers a wide range of epdm, neoprene and Hypalon expansion joint gutters, moisture barriers and accessories. 

Available in custom sizes that are factory engineered and fabricated, to a wide range of standard sizes ranging from 12″ – 61″, EBP Moisture barriers and Gutters can meet your projects exact specifications and conditions.

Redline Waterproofing Expansion Joint Membranes

RedLINE® is a technological advancement in expansion joints replacing the technology of raised expansion joints of the last 50 years. RedLINE® has been specifically developed to waterproof expansion and control joints. RedLINE® solves the dual problem of accommodating movement (and contraction) while at the same time maintaining water tightness. RedLINE® is developed to be installed at the waterproof membrane level, this provides for a non-obstructive joint, allowing free water drainage across the joint

RedLINE® is designed for use with all types of liquid (hot or cold) e.g. asphalt/coal tar pitch mopped systems.
The following systems are most suited to RedLINE® application:

Flamline Waterproofing Expansion Joint Membranes

FlamLINE® is technological advancement in expansion joints replacing the technology of raised expansion joints of the last 50 years. FlamLINE has been specifically developed to waterproof expansion and control joints. FlamLINE® solves the dual problem of accommodating movement (and contraction) while at the same time maintaining water tightness. FlamLINE is developed to be installed at the waterproof membrane level, this provides for a non-obstructive joint, allowing free water drainage across the joint.

FlamLINE® is designed for use with Torched Modified Bitumen Membranes as well as Self Adhered Membranes. FlamLINE® can also be used with a two part epoxy on vertical surfaces or substrates such as metal, wood or plastic. FlamLINE® itself does NOT contain any asphalt.

EPDM Gutters and Membranes

Rubber membrane is manufactured from synthetic EPDM rubber. The EPDM rubber membranes is a single-ply membrane that can be used for various applications such as waterproofing of basements, roofs/terraces, expansion joints, wet areas (toilet blocks), facades, etc. It is a single product that can be used for waterproofing most parts of a building. The EPDM rubber waterproofing membranes are techno-commercially much better than substitutes such as bitumen membranes, crystalline products, admixtures, various coatings, etc. The use of these products may be avoided in projects where EPDM rubber membranes are used. The EPDM waterproofing membranes are an excellent substitute to the torch-on membranes.

Wabo Gutterflex  

Wabo®GutterFlex is a flexible fabric reinforced neoprene gutter that satisfies the required movement criteria and compresses without damage during the full cycle of joint closure. The system collects and drains excess amounts of moisture through a drain tube that exhibits similar flexibility. The neoprene gutter is fabric reinforced to minimize material elongation due to the collection of excess moisture or debris. The under slab model provides a cost-effective solution for the remedial repair of falling systems. Either version can be used as a secondary back up to moisture protection on any expansion joint system in today’s marketplace.

Hypalon® Gutters and Moisture Barriers

Burke has been providing high-performance rubber products for construction and industry for more than 55 years. As pioneers in the manufacture of high-performance flexible membrane materials for more than 20 years, DuPont Performance Elastomers and Burke have been working to refine the use of Hypalon® based flexible membranes for use in a broad range of applications and weather conditions. Projects completed with Hypalon® in 1970 are still providing excellent leak proof performance and show no sign of deterioration or need of repair.